Summit FFAR-10 - Manual (Page 2)

Before Putting Into Use
Instructions for Use
These instructions for use are intended for the user. They describe the appliance
and the correct and safe way to use it. The instructions were prepared for various
models/types of refrigerators therefore you may find in it descriptions of some
accessories and functions that do not apply to your appliance.
• Remove the interior and exterior packaging
• Before connecting the appliance to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
We Care About the Environment
• Our appliances are distributed in packaging made of environmental
friendly materials which could safely be recycled, disposed of or
destroyed without any effects on the environment whatsoever.
• Our instruction manuals are printed on recycled paper or chlorine free
bleached paper.
Tips for Energy Savings
• Try not to open the door too often, especially when the weather is hot
and humid. Once you open the door try to close it as soon as possible.
• Every now and then check if the appliance is sufficiently ventilated
(adequate air circulation behind the appliance).
• Set thermostat from higher to lower settings as soon as possible
(depending on how loaded the appliance is, the ambient temperature
etc...).
• The coils on the rear of the refrigerator should be cleaned and free of
dust or any other impurities.
• Ice and frost layer increase energy consumption, so do clean the
appliance as soon as the layer is 1/8” thick.
• Always consider instructions stated in sections Positioning and Energy
Saving Tips, otherwise the energy consumption is substantially higher.
• Do not place hot foods in the refrigerator.
• A cool dry place allows your refrigerator to operate more efficiently so
keep the refrigerator away from stoves and other heat sources.
Instructions for Use