Sony CCD-TRV107 - Manual (Page 29)

29
Playback
–
Basics
— Playback – Basics —
Playing back a tape
You can monitor the playback picture on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder.
(1) Install the power source and insert the recorded tape.
(2) Set the POWER switch to PLAYER while pressing the small green button.
(3) Open the LCD panel while pressing OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two VOLUME buttons. The speaker
on your camcorder is silent when the LCD panel is closed.
You can control playback using the Remote Commander supplied with your
camcorder. (CCD-TRV107/TRV408 only)
To stop playback
Press x.
3
6
2 5 4
VOLUME
1
C
A
M
ER
A
PL
A
Y
E
R O
F
F
(C
H
G
)
POWER
REW PLAY
CCD-TRV408