SpectraLink SVP100 - Manual (Page 20)

SpectraLink Corporation Installation, Configuration, and Administration
NetLink SVP Server (within IP environments)
PN: 72-0178-01-F.doc Page 20
When the name services are set up correctly, the NetLink SVP Server can
translate hostnames to IP addresses. Using telnet, it is also possible to
access the NetLink SVP Server using its hostname instead of the IP
address.
Workgroup
As set in WINS.
Syslog Server
Logging can be set to Syslog or NONE . If Syslog is set, a message is sent to the
syslog server when an alarm is triggered.
Disable Telnet Service
Prevents Telnet access into the SVP Server. Reset the SVP Server for the change
to take effect. Upon reset the Telnet protocol server is not started.
The NetLink SVP Server must be reset in order to set the configuration options. If
the NetLink SVP Server is in Maintenance Lock , you must manually reset it by
selecting the Reset option in the SVP-II Configuration screen and then pressing Y
upon exit.