Ardo FLOI126L - Manual (Page 9)

9
SM2620
GB
CONTROL PANEL
EASY LOGIC: The EASY LOGIC system automatically regulates the wash time and water and power
consumption according to the actual amount of washing placed in the drum. The ½ load function is
therefore redundant in that the EASY LOGIC system automatically sets the wash parameters.
EASY IRON: Press button G to select the Easy Iron option. The washing machine will
regulate the wash parameters to reduce the formation of creases and make ironing
easier. The spin speed is set automatically at 500 rpm.
START: During the programme and wash options selection phase, the Start LED
will fl ash. To confi rm the selections and start the wash cycle, press “Start” button H.
The LED will light up.
AUTOCLEAN: Frequent washes at low temperatures can lead to the formation of mould and create
bad smells inside the washing machine. The AUTOCLEAN function thoroughly cleans the washing
machine by means of a special 90°C cycle.
AUTOCLEAN will automatically suggest starting the cleaning programme after a certain number of
washes, if no hot washes have been carried out during this time. This it does by means of a fl ash-
ing on the display.
Remove all the washing from the drum, place knob I in position , and press Start button H to
start the cycle.
The AUTOCLEAN programme can be effected at any time or when circumstances require it. Remove
the washing in the drum and close the door. Place knob I in position , keeping button pressed
until appears on the display. To start the AUTOCLEAN cycle, press the Start button H
TECHNICAL CHARACTERISTICS
Width (cm)
Height (cm)
Depth (cm)
MODEL FLOI 147 L
59.5
82.0
54.1
1400
59.5
82.0
54.1
1200
FLOI 126 L
Dimensions
Max. spin speed (rpm)
Water pressure
Electrical connection see rating plate
0.05 MPa - 1 MPa