Sharper Image SI871 - Manual (Page 14)

Cleaning the Collection Grid
3. Use a dry or slightly damp
towel or sponge to quickly
wipe the dust from each of
the three collection bars.
4. Before replacing the grid,
invert the entire unit two
or three times.
Note: The grid may also be
washed with warm soapy water, then rinsed.
If this method is used, allow 24 hours for the
grid to completely dry before reinserting it into
the main housing.
Thorough Cleaning
If the unit makes noise during operation, a thorough cleaning of
the grid, back grill and OzoneGuard front grill may be required.
1. Before cleaning, unplug the unit.
2. Release the grills by lifting the blue RELEASE-TABS on the
bottom of the grills. Slide up to remove.
14