Stoelting Endura 131G - Manual (Page 31)

23
SECTION 5
REPLACEMENT PARTS
5.1 HOW TO ORDER PARTS
To assure receipt of the proper replacement parts, supply
your dealer or distributor with the following information:
A. Model number of equipment.
B. Serial number of model, stamped on nameplate.
C. Part number, part name and quantity needed. Common part
names and numbers are listed in this manual.
O-RING IDENTIFICATION SHEET
MODELS ENDURA/FUTURA 131
Carburetor (1)
624677
1-1/8" ID x 1/8" CS
Spigot (4)
624598
5/8" ID x 1/8" CS Middle, Center Spigot
624664
1-1/16" ID x 1-5/16" x 1/8
Front Door (1)
625133
4" ID x 3/16" CS
O-rings are drawn to
Approximate Size Rear Seal (1)
624678
1-1/8" ID x 3/16" CS
Center Spigot
624614
3/4" x 1.0" x 1/8"
Part Number Description Part Number Description
208135 Brush, Nylon: 16" x 4", Wooden Handle 324107 Caution - Hazardous Moving Parts
208380 Brush, Nylon: 14" x 1/4", Wire Handle 324105 Danger - Electrical Shock Hazard
208401 Brush, Nylon: 10" x 1", Wire Handle 324106 Caution - Electrical Wiring Materials
208467 Brush, Nylon: 5-1/4" x 3/8", Wire Handle 324141 Caution - Hazardous Rotating Blades
3157992 Model ID Plate 324584 Adequate Ventilation
324594 Heat Sensitive 324371 Decal, Time Delay Fuse