Ardo WDN 1264 SW - Manual (Page 9)

9
SM2719
PROGRAMME TABLE
GB
EASY LOGIC: The EASY LOGIC system automatically regulates the wash time and water and power
consumption according to the actual amount of washing placed in the drum. The ½ load function is
therefore redundant in that the EASY LOGIC system automatically sets the wash parameters.
8.0 6.0
8.0 6.0 T
T
T
T
8.0 6.0
8.0 6.0
4.0 3.0
4.0 3.0
2.0 1.5
4.0 3.0
2.0 1.0
5.0 4.0
8.0 6.0
8.0 6.0
Programmes Type of washing Options
Max. spin
speed
(rpm)
Temperature Symbol
Maximum load
depending on the
model and the
selected
program
Heavily soiled white linen and cotton fabrics with organic stains.
Resistant white and coloured fabrics in linen and cotton.
Reference programme according to standard EN 60456.
The special Jeans programme carries out a delicate wash at 40°C,
which looks after the Denim fibres and at the same time prevents
discolouring. Clothing in faded Denim fabrics will remain as-new.
The special EcoA programme guarantees the best possible results
of a Class A wash efficiency at only 40°C, with maximum energy
saving. Reference programme for Consumer Associations.
The Wool programme is ideal for washing particularly delicate items
labelled as being “machine washable”. The programme looks after
the colours and retains the original texture of the items over time.
The programme has been tested and certified by the Woolmark
Company, an Australian company that guarantees the quality of pure
virgin wool through rigorous controls and tests.
Delicate items require extra care and are normally washed by
hand.
The Hand Wash function treats the wash items with utmost
delicacy.
The Express Wash 20' programme is suitable for refreshing lightly
soiled items in only 20 minutes. Express 20' means saving precious
time by performing a wash cycle at 35°C.
The special Mix programme allows different fabrics (cotton, synthetics,
mixed) to be washed together with perfect results.
The Rinse programme is useful for rinsing hand-washed items or
for refreshing items that have not been used for a long time.
The spin speed can be regulated for all types of fabrics.
The Dry programme is useful for items that have already been washed and
which need to be dried only. This function is also useful for removing dampness
from items that need to be stored for any length of time. If the washing is very
wet, run a spin cycle before drying in order to save time and energy.
Load imbalance check during spinning:
This washing machine is fi tted with a special electronic load balancing control system. Before each
spin, the system makes sure that the clothes are distributed as uniformly as possible in the drum. If
the washing is not distributed uniformly, the fi nal spin speed is reduced for safety reasons, while if
the load is drastically out of balance, the spin is not effected.