SoundCraft MPM 20/2 User Manual
Page 21
21
AUX
22 AUX MASTERS
These three controls set the output levels of the three Aux Outputs.
23 AFL
These After Fade Listen switches route their respective aux output signal to the monitor/headphones out-
puts.
24 PRE/POST SWITCHES
These two switches globally switch the AUX 1 and AUX 2 feeds, respectively, on all the input modules to be
either pre-fade or post-fade. AUX 3 is always post fade on the input modules.
25 AUX OUTPUTS 1, 2 & 3
These outputs are on 3-pole 6.35mm (1/4") jacks and are balanced.
This manual is related to the following products: