Save these instructions, Important safety instructions, For household use only – Shark V1510 User Manual
Page 3: For replacement filter information, For technical support, Ordering replacement dust cup filters, For model v1510, Important
IMPORTANT SAFETY INSTRUCTIONS
ORDERING REPLACEMENT DUST CUP FILTERS
When using your SHARK Hand Vacuum with Motorized Brush, basic safety
precautions should always be observed, including the following:
FOR REPLACEMENT FILTER INFORMATION
for Model V1510
To reduce the risk of fire, electric shock, or
injury:
•
Do not leave the hand vacuum plugged in
when unattended. Unplug the electrical cord
when not in use and before servicing.
•
Do not allow to be used as a toy. Close
attention is necessary when used by or near
children, pets or plants.
•
Use only as described in this manual. Use
only manufacturer’s recommended
accessories.
•
Do not pull cord, use cord as a handle, close
a door on cord, or pull cord around sharp
edges or corners. Keep cord away from
heated surfaces.
•
Use only extension cords UL-rated or cUL at
15 amperes. extension cords rated for less
amperage may overheat. Care should be
taken to arrange the cord so that the cord
cannot be pulled or tripped over.
•
Turn off all controls as applicable before
unplugging from electrical outlet.
•
Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
•
Do not handle plug or hand vacuum with wet
hands or operate without shoes.
•
Do not put any objects into openings. Do not
use with any opening blocked. Keep free of
dust, lint, hair and anything else that may
reduce air flow.
•
Store your appliance indoors in a cool, dry
area.
•
Keep your work area well lit.
•
Do not immerse the hand vacuum into water
or other liquids.
•
Keep end of hose and other openings away
from your face and body.
•
Use only on dry surfaces.
•
Using improper voltage may result in damage
to the motor and possible injury to the user.
Correct voltage is listed on rating label.
1.
Read all instructions before using your
SHARK hand vacuum.
2.
Use the system only for its intended use.
3.
To protect against a risk of electric shock,
do not immerse any part of the system in
water or other liquids.
4.
Never yank cord to disconnect from
outlet; instead, grasp plug and pull to
disconnect.
5.
Do not allow cord to touch hot surfaces.
6.
Do not run appliance over cord.
7.
Do not operate the system with a damaged
cord or plug, or if the appliance or any other
part of the system has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble or attempt to
repair the hand vacuum. Return the
system to EURO-PRO Operating LLC (see
warranty) for examination and repair.
Incorrect re-assembly or repair can cause a
risk of electrical shock or injury to persons
when the hand vacuum is used.
8.
Close supervision is necessary for any
appliance being used by or near children.
Do not leave the system unattended while
connected.
9.
Keep hair, loose clothing, fingers and all
parts of body away from opening and
moving parts.
10. Do not use to pick up flammable or
combustible liquids such as gasoline or use
in areas where they may be present.
11. Do not pick up anything that is burning or
smoking such as cigarettes, matches or hot
ashes.
12. Use extra care when cleaning on stairs.
13. Do not use the hand vacuum without the
dust cup filter in place.
14. This appliance is intended only for
household use. Follow all user instructions
in this manual.
Call:
1 (866) 98SHARK
(74275)
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Or visit our website:
www.sharkvac.com
For Technical Support
for Model V1510
Call:
1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note:
The HEPA Dust Cup Filter is washable. It should, however, be replaced
every six (6) months to ensure peak performance of your vacuum.
Important:
Make sure that HEPA filter is completely dry before re-installing back in the
hand vacuum.
SAVE THESE INSTRUCTIONS
For Household Use Only
WARNING: To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
Rev. 01/04
8
1