Soleus Air air-condition User Manual

Page 7

Cautions

1. In any case the compressor will restart 3 minutes after power failure
2. The air-conditioner adopts three core plugs:

Modification will void warranty

3. Working voltage of the air-conditioner must keep within the range of 115VAC±10. If the

voltage is too high or low will lead to damage of the compressor.

4. The normal working environment temperature of the air conditioner is: 0F to115F

Maintenance and Safeguard

It will keep at maximum performance ratings if you perform routine maintenance. After running
for 90 days, you must clean up dust around the fins of the heat exchanger in order to keep
refrigeration performance at optimum

TROUBLE SHOOT CHART

Problem Possible

Cause

Solution

Doesn’t cool / heat

1. The voltage of the power

is lower than 97V

2. You are using an

extension cord for the unit

3. The system leaks Fluorine
4. Button “ON/OFF” failure
5. Set the temperature to the

abnormal position.

6. Compressor not working.

7. The sub cooling of

compressor is protected
and does not work

8. Capillary is blocked

Adjust the voltage range into
normal demand.
Do not use an extension cord.

Call repair technician
Replace button “ON/OFF”.
Refer to operation explanation.

Turn off for ten minutes. Turn
back on
Call repair technician

Call repair technician

Inadequate cooling

The evaporator and/or
condenser are blocked by
debis

2. The doors and windows

have opened frequently.

3. Heat load is too high.

4. Set temperature is in

improper position.

5. Capillary is blocked.
6. The refrigeration system

has failed.

Clean the evaporator and
condenser.

Reduce times that open the
door.
Installation of larger unit.
Adjust the set value.

Call repair technician
Call repair technician