Woodstock Classic Fence W2005 - Manual (Page 4)

-2- Shop Fox ® Classic Fence
Thank you for purchasing Woodstock
International’s SHOP FOX ® Classic Fence.
This fence is classic in its design and function,
and provides a perfect upgrade for table saw
owners who expect precision and ease of
installation. It has been designed to fit almost
all contractor and cabinet-style table saws and
is easy to install.
The SHOP FOX ® Fence features include:
• Wide T-shape style design for maximum
accuracy and support.
• Single locking action cam lever.
• Simple mounting procedure, easy lift off
design for the fence makes using jigs and
fixtures simple.
• HDPE high durability plastic fence surface
provides low sliding resistance.
• Fence can be used on either the right or
left side of the blade.
• Magnified cursor can be mounted on
either side of the fence.
• Fence body has powder coated paint
surface for durability.
• Standard rails provide 25" maximum rip to
the right of the blade (W2005).
• Optional long rails provide 54" maximum
rip to the right of the blade (W2006).
Woodstock is pleased to provide this manual
to assist in the installation and operation of
the SHOP FOX
® Classic Fence. It represents
our effort to offer the finest documentation
available. If you feel there are areas where this
manual could be improved, we encourage you
to write us with your comments at the following
address:
Technical Documentation
Woodstock International, Inc.
P.O. Box 2309
Bellingham, WA 98227
Tel: (360) 734-3482
Fax: (360) 671-3050
This fence was specifically designed to
be used on table saws to assist in cutting
operations. DO NOT MODIFY AND/OR USE
THIS FENCE FOR ANY OTHER PURPOSE.
Modifications or improper use of this device
will void the warranty. If you are confused
about any aspect of this accessory, DO NOT
use it until all your questions have been
answered. Serious injury may occur.
General
INTRODUCTION