Sharp Inside Pro - Manual (Page 3)

3
28 1/8"
23 3/8"
14 19/32"
1 13/16"
door thickness
15 13/32"
30"
15"
auto drawer
opening
2"
4 11/16"
36"
countertop
height
30" *
cabinet min.
28 7/16"
opening
14 3/4"
opening
allow 1/4"
overlap
allow 7/16"
overlap
allow 3/4"
overlap
allow 3/4"
overlap
19"
to top of floor
4"
5"
electrical outlet
location
2x4 Anti-
Tip block
floor must
support
100 lbs.
NOTE: Open Top
Cabinet illustrated
14 3/4"
to bottom
of Anti-Tip
block
3 1/2"
6"
23 1/2"
min depth
84"
wall
cabinet
30"
cabinet min.
28 7/16"
opening
14 3/4"
opening
allow 1/4"
overlap
allow 7/16"
overlap
allow 3/4"
overlap
allow 3/4"
overlap
*19"
to top of floor
(recommended)
4"
5"
2" minimum
electrical outlet
location
2x4 Anti-Tip block
optional wall oven
cutout illustrated
in sketch
floor must
support 100 lbs.
14 3/4"
to bottom
of Anti-Tip
block
3 1/2"
(6")
23 1/2"
min depth
INSTALLATION MANUAL
Figure 2
Figure 1
Figures 1 and 2 contain many Microwave Drawer measurements
for reference when planning the drawerʼs location.
MICROWAVE DRAWER MEASUREMENTS
ANTI-TIP BLOCK
4"
5"
electrical outlet location
2x4 Anti-
Tip block
(6")
Figure 4
Figure 3
NORMAL INSTALLATION STEPS
ANTI-TIP BLOCK INSTALLATION INSTRUCTIONS
To reduce the risk of tipping of the drawer, the Anti-Tip block
must be properly installed located 14 3/4-inches above the fl oor on
which the Microwave Drawer will sit. The 6-inch 2 x 4 Anti-Tip
block must be provided by the installer. See Figures 1, 2 and 4.
The Anti-Tip block prevents serious injury that might result from
spilled hot liquids.
If the Microwave Drawer is ever moved to a different location, the
Anti-Tip block must also be moved and installed. When installed
to the wall, make sure that the screws completely penetrate the
dry wall and are secured in wood or metal so that the block is
totally stable. When fastening, be sure that the screws do not
penetrate electrical wiring or plumbing.