Sunbeam 102817 - Manual (Page 34)

32
Getting Started Getting Started
If you experience difficulties when operating the breadmaker,
review the troubleshooting information in this section to find a
solution. If you are unable to find a solution, please call our
Consumer Relations Department at 1(800)526-2832.
If you have a power outage
If the power goes out while you are using your breadmaker,
the display will go blank.
• If the breadmaker is kneading the bread, you can restart
the machine and continue.
• If the machine is baking bread, either finish baking the
bread in an oven or start from scratch with a new loaf.
When the power comes back on, you should do the following:
1
Hold down the “Start/Stop” button for at least 3 seconds. If
the display does not return to the time setting before the
outage, unplug the breadmaker and then plug it back in.
2
If the machine still does not start, hold down the
“Start/Stop” button a second time for 3 seconds.
Continue to unplug and replug the machine and hold
down the “Start/Stop” button until the display returns to
the cycle time before the power outage.
Troubleshooting