SOYO SY-K7VTA PRO User Manual

Page 49

BIOS Setup Utility

SY-K7VTA PRO

2-3.7 Power On

You have now completed the hardware installation of your Motherboard
successfully.

1. Turn the power on

2. To enter the BIOS Setup Utility, press the ~~key while the system~~

is performing the diagnostic checks,

Note: If you have failed to enter the BIOS, wait until the boot up
sequence is completed. Then push the RESET button and press
key again at the beginning of boot-up, during diagnostic
checks.

Repeat this operation until you get the following screen.

3. The BIOS Setup screen appears:

CMOS Setup Utility – Copyright ( C ) 1984-2000 Award Software

Soyo Combo Feature

PC Health Status

Standard CMOS Features

Load Fail - Safe Defaults

Advanced BIOS Features

Load Optimized Defaults

Advanced Chipset Features

Set Supervisor Password

Integrated Peripherals

Set User Password

Power Management Setup

Save & Exit Setup

PnP/PCI Configurations

Exit Without Saving

Esc : Quit

: Select Item

F10 : Save & Exit Setup

Change CPU’s Clock & Voltage