Sony HT-DDW665 - Manual (Page 31)

Ad
dition
al I
n
fo
rm
atio
n
masterpage:Right
lename[E:\SEM_Janet\J9040000_4252086821DDW665US\4252086821\GB09ADD_HT-
DDW665-US.fm]
31 US
model name1[HT-DDW665]
[4-252-086-82(1)]
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy the
problem (page 10). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver’s memory
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, both channels driven, from
120 – 20,000 Hz; rated 55 watts per channel
minimum RMS power, with no more than 0.7%
total harmonic distortion from 250 milliwatts to
rated output.
Amplifier section
Power Output
1)
(6 ohms 1 kHz, THD 10%)
FRONT
2)
: 85 W/ch
CENTER
2)
: 85 W
SURR
2)
: 85 W/ch
(6 ohms 100 Hz, THD 10%)
SUB WOOFER
2)
: 85 W
1) Measured under the following conditions:
120 V AC, 60 Hz
2) Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
Reproduction frequency range:
28 – 20,000 Hz
Tone
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate Frequency 10.7 MHz
To clear See
All memorized settings page 10
Customized sound fields page 21
Specifications
DVD, VIDEO Sensitivity: 800 mV
Impedance: 50 kiloohms
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
VIDEO (Optical) Sensitivity: –
Impedance: –
Gain levels ±6 dB, 1 dB step
continued
GB01COV_HT-DDW665-US.book Page 31 Monday, April 26, 2004 10:03 AM