Sceptre Technologies X22 - Manual (Page 35)

SCEPTRE X22 Page35
1. Turn on the LCD and the
computer.
2. While the computer is turned on,
press the “F8” key on your
keyboard continuously until a
selection menu appears and
select the “Safe Mode” option.
3. When you’ve entered Safe Mode
please uninstall any video card
driver and monitor driver by using
either the “Add / Remove
Programs” icon or going into
“System Properties” and
manually removing anything
under “Monitors” and “Display
Adapters”.
4. After removing all the drivers,
please reboot your computer and
you should be able to see
windows. Please install your
monitor driver first, then your
video card driver. Please
remember to make sure your
refresh rate should be at 60Hz.
I CANNOT GET
THE
RESOLUTION
1680X1050 If you are using DVI, please try out VGA
to see if you are able to achieve that
resolution. If your VGA can then, your
video card’s DVI cannot support
widescreen resolutions.
Sometimes your video card will not read
the monitor correctly and will not allow
you to achieve the resolution you want.
Rebooting your computer will solve the
situation.
You can also make sure your video card’s
video drivers are up to date. You can find
what video card you have by clicking on
START then RUN. Type in “DXDIAG”.
When the diagnostic window pops up,
click on the DISPLAY tab. The program