Built-in model 601f – Sub-Zero 601F User Manual
Page 12
Planning Information
Built-In Model 601F
Dimensions in parentheses are in
millimeters unless otherwise specified.
12
1
1
/
4
"
(32) PANEL
1"
(25) PANEL
1
/
4
"
(6) PANEL
1
/
2
"
(13) PANEL
3
/
4
"
(19) PANEL
5
/
8
"
(16) PANEL
DOOR
1
/
4
"
(6)
APPROXIMATE THICKNESS OF WRAPPED STAINLESS STEEL DOOR
NOTE: FOR OVERLAY APPLICATIONS, OPTIONAL STAINLESS STEEL HANDLE
MUST BE MOUNTED ON PANEL MINIMUM 5/8" (16) THICK.
1"
2"
(51)
3"
(76)
STANDARD STAINLESS STEEL HANDLE
P A N E L A N D H A N D L E P R O F I L E
The full-scale illustration above shows handle
placement for the standard stainless steel
handle on the wrapped stainless steel door and
on overlay panel applications shown in the
dashed line.
IMPORTANT NOTE: For overlay applications,
the optional stainless steel handle must be
mounted on a panel at least
5
/
8
" (16) thick.
For overlay applications, mount door handles
close to the opening edge of the door for ease
of opening.
H A N D L E P R O F I L E – S T A I N L E S S S T E E L / O V E R L A Y A P P L I C A T I O N S