Sharper Image SI714 - Manual (Page 7)

Condensation Warning
It is normal for this unit to produce some condensation in either
the HOT or COLD setting. Do not place this product on any sur-
face that could be damaged by water.
• When open containers are stored for several hours in the HOT
operation mode, condensation may build up and leak from the
edges of the door.
• When the unit is switched from COLD to HOT, or just turned
off after several days of COLD operation, ice that has built up
around the heating/cooling element will melt and puddle to the
bottom of the unit. Some of this water may leak from the edges
of the door.
Defrosting
Periodic defrosting of this product is required to eliminate build
up of ice:
Place the upright unit on a folded towel and operate on HOT
for 15-30 minutes, or unplug and allow to defrost overnight.
Empty the water and dry the interior with a towel. Do not place
on a surface that may be damaged by water leaking from the
unit as it defrosts.