SoundCraft Audio Mixing Console Model Spirit Studio User Manual

Page 19

26.

GROUP FADERS
Long-throw master faders for each Group. Unity gain is

at the top of their travel.

27.

GROUP OUTPUTS
The output from each Group is driven by a ground-

compensated amplifier and fed to standard

⁄

" 3 pole

A gauge jack sockets.

28.

GROUP INSERTS
These allow external processing equipment to be in-

serted into the Group signal path. The

⁄

" 3 pole A

gauge jack sockets are by-passed except when a plug

is inserted.

29. PFL

When the PFL switch is pressed, the pre-fade Group

signal is fed to the Control Room Monitors and Head-

phones, where it replaces the selected source. The

PFL/AFL LED on the master section illuminates to

warn that the monitor and the meters are now respond-

ing to the PFL/AFL selection and the PFL LED on the

Group lights to identify the active Group.

30. SUBGROUP

MIX/MONO

The MIX switch routes the Groups as odd and even

pairs to the stereo Mix, or if the MNO switch is pressed

the groups are fed equally to both sides of the stereo

Mix.

31.

BARGRAPH METERS
A 16-segment, three colour bargraph meter provides

visual monitoring of output level for each Group. The

meter is factory set to a PEAK characteristic, but may

be changed internally to a VU characteristic. Please re-

fer to the Selectable Options section (Page 31) for

details.

Page 17