Smeg WM61121 User Manual

Page 15

187352

spin) to empty the water and terminate the program.

Pause button

By pressing the START/PAUSE button (C) program

may be suspended at any time. After certain time you

may open the door if there is no water in the drum,

otherwise this is not possible. Program is continued

by pressing the START/PAUSE button (C).

•

Failures

Program is suspended in case a failure occurs.

Signal LED’s are flashing (see cf. Troubleshooting).

•

Power failure

At electric cutout the program is interrupted,

however, after the power supply has been re-

established, the program operation automatically

proceeds.

If a power failure occurs when the drum is

still full of water, be careful not to open the

door before you pump the water out.