SUUNTO T6C - Manual (Page 16)

2. Scroll to TONES with [Lap +] and [Light -].
3. Set the tones on or off with [Mode].
4. Press [Start Stop] to exit.
3.3.2 Setting icons
When the icons are enabled and you switch to a mode, a mode icon is briefly shown
on the screen before the main display opens.
To set the icons:
1. In the settings menu, enter GENERAL .
2. Scroll to ICONS with [Lap +] and [Light -].
3. Set the icons on or off with [Mode].
4. Press [Start Stop] to exit.
3.3.3 Setting backlight
You can set the backlight on or off and adjust the backlight settings of the Suunto t6c
display.
The backlight has three possible settings:
● NORMAL : The light switches on when you keep [Light -] pressed or when an alarm
is activated. The light stays on for a short while after the last press of a button.
● OFF : The light cannot be switched on by pressing a button or during alarm.
● NIGHT USE : The light is switched on when you press any button and stays on for
a short while after the last press of a button.
15
en