Siemens CX65 - Manual (Page 50)

©
Si
emens AG 2
003, \\Del
lserver\use
rs\a
dm
in\CX65\E2
\short\KC
X
65_Setup.fm
49 Setup
VAR Language
: English; VA
R i
ssue date: 09-Feb
ruar-2004
left page (49) of KCX 65 Ulysses en2 short, A31008-H7100-M7-1-RC19 (26.04.2004, 14:24)
Connectivity
C
¢
T
¢
Connectivity
¢
Select function.
GPRS b
(General Packet Radio Service)
GPRS is a new method for transmit-
ting data faster in the mobile net-
work. Symbols in the display, see
p. 6.
GPRS info
Display connection information.
IrDA
Your phone has an infrared inter-
face. The distance between the two
devices must not exceed 30 cm. The
infrared windows in both appliances
must be aligned as accurately as pos-
sible with each other. Symbols in the
display, see p. 6.
Data services
Default setting and activation of the
connection profiles for the applica-
tions MMS, WAP . The phone default
setting varies from service provider
to service provider: consult your
service provider or go to this address
in the Internet for more information
www.siemens-mobile.com/customercare
in the FAQ section.
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult your service provider
or go to this address in the Internet
for more information
www.siemens-mobile.com/customercare
in the FAQ section.
Authentication
Activate or deactivate encrypted
WAP dial-up (CSD connections only).
Fax/data
Send voice/fax
b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec voice/fax
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connec-
tion).
Rec fax/data
b
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program in your PC to
receive the fax/data.