Sony HT-IS100 - Manual (Page 48)

48 US
To listen to non-preset radio
stations
Use manual or automatic tuning in step 2.
For manual tuning, press TUNING + or –
repeatedly.
For automatic tuning, press and hold TUNING +
or –. The automatic tuning stops automatically
when the system receives a radio station. To stop
the automatic tuning manually, press TUNING +
or –.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1
Press MENU.
2
Press X/x repeatedly until “FM Mode?”
appears in the top panel display, then
press
or c.
3
Press X/x to select “MONO.”
The default setting is underlined.
• STEREO: stereo reception.
• MONO: monaural reception.
4
Press .
5
Press MENU.
• To improve reception, reorient the supplied antennas
(aerials).
Naming preset stations
You can enter a name for preset stations. These
names (for example, “XYZ”) appear in the top
panel display when a station is selected.
Note that no more than one name can be entered
for each preset station.
1
Press TUNER/BAND.
The last received station is tuned in.
You can change “FM” or “AM” by pressing
TUNER/BAND.
2
Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.
3
Press MENU.
4
Press X/x repeatedly until “Name In?”
appears in the top panel display.
5
Press .
6
Create a name by using C / X/x/ c .
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
If you enter a wrong character
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
To erase the character, press
C/c repeatedly
until the character to be erased flashes, then
press CLEAR.
7
Press .
“Complete!” appears in the top panel
display, and the station name is stored.
8
Press MENU.
Tip