Sangean 180 - Manual (Page 8)

7
Manual tuning
Turn on the radio, select required band by
pressing Band Selection button.
Desired station may be selected by pressing
the Tuning Control buttons intermittently until
the desired station is reached.
Or pressing and holding the Tuning Control
until the desired station is reached.
Memory Tuning (Station Preset)
Turn on the radio by pressing Power On/Off
button. Select required band by pressing
Band Selection button. Tune to the desired
station using the Scan or Manual tuning
described above. When the desired station is
reached, press and hold Memory button for
more than 2 seconds until display M x stop
flashing followed with a beep (via earphone).
It will replace previous memory station.
You may store 5 memory stations each band
(AM, FMI, FMII and TV).