beautypg.com

Bagless upright vacuum, For technical support, Important – Shark UV219CS User Manual

Page 4

background image

PRECAUTIONARY MEASURES

Important:

If the suction opening in the unit, the hose or the extension tube become
blocked, switch off the vacuum cleaner and remove the blocking
substance before you start the unit again.

1.

Do not operate the vacuum
cleaner to close too heaters,
or radiators.

5.

When pulling out the power plug
from the wall outlet, pull the plug
not the power cord.

BAGLESS UPRIGHT VACUUM

TO ORDER REPLACEMENT FILTERS OR BELTS

for Model UV219CS

Call:

1 (800) 798-9398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

or

visit our website: www.sharkvac.com

6.

Do not pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.

2.

Before inserting the power plug
into the wall outlet, make sure that
your hands are dry.

7.

Do not run appliance over power
cord.

FOR TECHNICAL SUPPORT

for Model UV219CS

Call:

1 (800) 798-7398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

3.

Do not vacuum any liquids.

Please Note:

Filter Ring, Secondary Filter, Pre-Motor and Exhaust Filters are washable.

They should however be replaced every three (3) months to ensure peak

performance of your vacuum.

The HEPA Dust Cup Filter may be washed. It should, however, be

replaced every three (3) to six (6) months, depending on amount of use, to

ensure peak performance of your vacuum. We recommend washing it

once a month or when suction appears to be reduced. To wash your HEPA

Dust Cup Filter, hold filter cartridge by frame flange and rinse under a tap

until all observable dirt has been removed. Some discoloration of the

HEPA filter material may occur, this is normal and will not affect the filter's

performance. When finished, shake off excess water. Do NOT wash in

dishwasher.

It is important that when you wash the HEPA dust cup filter, you allow it to

dry COMPLETELY before using again. We recommend 24 hours to air

dry. DO NOT DRY IN DRYER.

Important:

Make sure that ALL the Filters are completely dry before inserting back in
the vacuum.

8.

Do not use without dust cup
filter or filters in place.

9.

Before you start vacuuming,
make sure to remove large or
sharp objects that might
damage the vacuum.

4.

Keep hair, loose clothing, fingers,

feet and all parts of body away from
openings, rotating agitator and other
moving parts.

2

11