SECO-LARM USA High Resolution Indoor Dome Cameras EV-2661-NKBQ 550 - Manual (Page 2)

SECO-LARM High Resolution Indoor Dome Cameras
2 SECO-LARM U.S.A., Inc.
Specifications
EV-2660-NKBQ EV-2660-NKBAQ EV-2661-NKBQ
Type Indoor Dome Camera
CCD 1 /
3
” Sony Super HAD Color
Resolution Color: 520 TV Lines
Color: 520 TV Lines
B/W: 550 TV Lines
Pickup elements 768x494 pixels
Video ouput format NTSC
Video output 1.0Vp-p composite video, 75Ω
Lens 2.8~10.5mm, F1.2 Tarmon lens
Minimum illumination Color: 0.3-lux
Color: 0.3-lux
B/W: 0.002-lux
S/N ratio >48dB
Sync Internal
White balance Automatic
#IR LEDs N/A 36
IR wavelength N/A 860nm
IR range N/A 118’ (36m)
Power source 12VDC 12/24 VAC/VDC
Current draw
LEDs off DC: 180mA
DC: 180mA
AC: 4.3W
LEDs on N/A
DC: 480mA
AC:12W
Operating temperature 14°~122° F (-10°~50° C)
Dimensions 5 1 /
8
”x4” (130x105 mm)
Weight 15-oz (420g)
Dimensions
EV-2661-NKBQ shown. Dimensions are the
same for all three models.
5 1 /
8
”
(130mm)
4”
(102mm)
Using the 3-Axis Gimbal
1. To adjust the horizontal pan, turn the camera ball
by hand up to 360°.
2. To adjust the vertical tilt, tilt the camera ball
by hand.
3. To adjust the angle of the third axis, loosen the
screw and twist by hand. Tighten the screw
when finished.
Parts List
1 x Screwdriver
1 x Manual
1 x Service monitor adapter
1 x DC plug with terminal block
EV-2660-NKBQ or EV-2660-NKBAQ shown. Gimbal
adjustment is the same for all three models.
1 x Camera
2 x Mounting screws
1
2
3
Third axis
screw