Stanton RM.416 - Manual (Page 11)

Specifications - continuation
8
9. eQ
MIC 1/2 12 +/- 3 dB, -12 +/- 3 dB, at 100 Hz
12 +/- 3 dB, -12 +/- 3 dB, at 1 kHz
12 +/- 3 dB, -12 +/- 3 dB, at 10 kHz
MIC 3/CHANNEL 10 +/- 2 dB, below -25 dB at 70 Hz
10 +/-2 dB, below -25 dB at 1 kHz
10 +/-2 dB, below -15 dB at 13 kHz
10. channel Balance Within 3 dB, from 0 to -40 dB
11. FaDeR kill More than 75 dB at 1 kHz for CHANNEL FADER
More than 70 dB at 1 kHz for CROSSFADER
12. uSB Section: (EQ FLAT, W/ 20 kHz LPF, MASTER OUTPUT, LOAD=100k ohm)
PlaYBack:
OUTPUT 0 dBV (1V) +/-2 dB (-20 dBfs, 1 kHz, MAXIMUM GAIN.)
THD+N Less than 0.06% (0 dBfs, 1 kHz, MASTER= 0 dBV OUT)
FREQUENCY RESPONSE 31 - 20 kHz +/- 2 dB (GAIN AT CENTER)
S/N RATIO More than 80 dB (A-WEIGHTED, GAIN AT CENTER)
CH SEPARATION More than 65 dB at 1 kHz (0 dBfs, A-WEIGHTED, GAIN AT CENTER)
RecoRDing anD PlaYBack: (LINE 1 kHz,-14 dBV INPUT, GAIN MAXIMUM)
OUTPUT 4 dBV (1.57 V) +/- 2 dB
THD+N Less than 0.15%