Connecting peripheral equipment, Connection with a pc or av equipment – Sharp PN-E601 User Manual

Page 10

Connecting Peripheral Equipment

Caution

• Be sure to turn off the main power switch and disconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the

equipment to be connected.

• Be careful not to confuse the input terminal with the output

terminal when connecting cables. Accidentally reversing

cables connected to the input and output terminals may

cause malfunctions and the other problems.

TIPS

• Images may not be displayed properly depending on the

computer (video card) to be connected.

• A screen with 1920 x 1080 resolution may not be

displayed correctly on PC RGB. In this case, check the

settings of your computer (video card) to verify that input

signals conform to specifications of this monitor. (See

Specifications.)

• If there is a check box to disable EDID in display control

panel, check it when using PC RGB.

• Use the automatic screen adjustment when a PC screen

is displayed for the first time using PC D-SUB or PC RGB,

or when the setting of the PC is changed. The screen is

adjusted automatically when SELF ADJUST in the OPTION

menu is set to ON.

• If the audio output from the playback device is connected

directly to speakers or other devices, the video on the

monitor may appear delayed from the audio portion.

Audio should be played through this monitor by connecting

the playback device to the monitor’s audio input, and

connecting the monitor’s audio output to the speakers or

other devices.

• The audio input terminals used in each input mode are

factory-set as follows.

Input mode

Audio input terminal

(Factory setting)

PC D-SUB, PC DVI-D,

PC RGB

Audio input terminal

AV DVI-D

Audio1 input terminal

AV COMPONENT,

AV S-VIDEO, AV VIDEO

Audio2 input terminal

PC HDMI, AV HDMI

PC/AV HDMI input terminal

Connection with a PC or AV equipment

1. PC/AV HDMI input terminal

• Use a commercially available HDMI cable (conforming to

the HDMI standard) for PC/AV HDMI input terminal.

• Set HDMI of INPUT SELECT on the OPTION menu

according to the device to be connected.

• Select the audio input terminal to be used in PC HDMI

or AV HDMI of AUDIO SELECT on the OPTION menu.

When HDMI is selected, connection to the audio input

terminal is unnecessary.

2. PC D-sub input terminal

• When the PN-ZB01 (optional) is attached, select the audio

input terminal to be used in PC D-SUB of AUDIO SELECT

on the OPTION menu.

3. Audio input terminal

• Use an audio cable without resistance.

• When the PN-ZB01 (optional) is attached, set the audio

input terminal used for each input mode in AUDIO

SELECT on the OPTION menu.

4. Audio output terminals

• The output sound varies depending on the input mode.

• The volume of the output sound can be fixed by setting

AUDIO OUTPUT on the OPTION menu.

• It is not possible to control the sound output from the

audio output terminals with the AUDIO menu.

5. RS-232C input terminal

RS-232C output terminal

• You can control the monitor from a PC by connecting a

commercially available RS-232 straight cable between

these terminals and the PC.

When the PN-ZB01 (optional)

is attached

3 4