Speco Technologies WIDE DYNAMIC RANGE CVC624WDR - Manual (Page 13)

If you have trouble operating your camera refer to the following
TROUBLESHOOTING
If you have trouble operating your camera, refer to the following
Problem Solution
Nothing appears on
the screen.
● Check that the power cord and line connection
between the camera and monitor are correct
● Check that you have properly connected VIDEO y p p y
cable to the camera VIDEO output jack.
The image on the
screen is dim.
● Is the lens stained with dirt? Clean your lens with
soft clean cloth.
●
Set the monitor for the proper conditions.
● If the camera is exposed to too strong light
change the camera position.
● Adjust the lens’ focus ● Adjust the lens focus.
The image on the
screen is dark.
● Adjust the contrast feature of the monitor.
● If you have an intermediate device, set the
75Ω/Hi-z properly.
The camera is not
working properly,
and
f f
● Check that you have properly connected
the camera to an appropriate power source.
the surface of the
camera is hot.
MOTION DETECTION
function is not active.
● Have you set ‘MOTION DET.’ menu to off?
● Have you set ‘MD LEVEL’ to too low?
● Have you set ‘MD AREA’ properly
13