Sony KD-32DX150U - Manual (Page 31)

Connecting other equipment
29
DIGITAL /
Connecting Other Equipment to the TV
A wide range of equipment can be connected to the TV through the front and rear sockets.
Connecting equipment to the rear sockets of the TV
Connecting a DVD player
Connecting a Decoder/Set top box
Connecting a Smartlink VCR
Smartlink is a direct link between the TV and a Smartlink VCR. Ensure your Smartlink VCR is
connected to the C socket labelled (
SMARTLINK ) i3/r3 VCR , using a fully wired 21 pin scart
lead. For more information on Smartlink, refer to your Smartlink VCR instruction manual.
Connecting to external audio equipment
1. Connect a scart lead from the B socket of the TV to a scart socket on your DVD
player (refer to your DVD instruction manual)
2. Insert a DVD into the DVD player, then press the ‘PLAY’ button. The picture
appears automatically on the TV.
If not, press the
/ button on the remote control repeatedly until the picture
appears on screen.
3. Press the DIGITAL/ button when you wish to return to normal TV operation.
1. Connect a scart lead from the A socket of the TV to a scart socket on your set top
box (refer to your set top box instruction manual).
2. Switch on your set top box. The picture appears automatically on the TV.
If not, press the
/ button on the remote control repeatedly until the picture
appears on screen.
3. Press the DIGITAL/ button when you wish to return to normal TV operation
1. Connect a phono jack lead from the D sockets of the TV to your Hi-Fi (refer to
your Hi-Fi instruction manual).
2. Use the ‘ Audio-out vol.’ option in the ‘Sound Adjustment’ menu to adjust the
volume level (refer to page 24).
Note: Connecting cables are not supplied.
B
A
D
C
Decoder/Set top box
VCR
Hi-Fi
DVD
29-36.fm Page 29 Monday, February 10, 2003 3:36 PM