SUPER MICRO Computer AS1011M-T2 - Manual (Page 45)

Chapter 5: Advanced Motherboard Setup
5-11
H8SMi-2 Quick Reference
Jumpers Description Default Setting
J18 PS2 Power Pins 1-2 (P5V Dual)
J24 USB Power Pins 1-2 (P5V Dual)
JBT1 CMOS Clear See Section 5-10
JCF1 Compact Flash Master/Slave Closed (Master)
JI 2 C1/2 I 2 C to PCI Enable/Disable Closed (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JWD Watch Dog Pins 1-2 (Reset)
Connectors Description
COM1, COM2 COM1/COM2 Serial Port/Header
FAN 1-5 System Fan Headers
IDE#1 IDE Drive Connector
J21 Redundant Power Supply Fail Header
J22 4-pin Auxiliary Power Connector
JAR Power Fail Alarm Reset Header
JD1 Onboard Speaker/Keylock/Power LED
JF1 Front Panel Connector
JFDD1 Floppy Disk Drive Connector
JL1 Chassis Intrusion Header
JOH1 Overheat Warning Header
JPW1 24-Pin ATX Power Connector
JSMB1 System Management Bus Header
JU2 UID LED Header
JUSB1 Universal Serial Bus (USB) Ports
JWF1 Compact Flash Card Power Connector
LAN1/2 Gigabit Ethernet (RJ45) Ports
nFAN1 CPU Heatsink Fan Header
SATA0 ~ SATA5 Serial ATA Ports
SIMLP IPMI 2.0 Card Slot
T-SGPIO1/T-SGPIO2 SGPIO Headers
USB4/5, USB6/7 USB Headers
WOL Wake-On-LAN Header
WOR Wake-On-Ring Header
LEDs Description
DP4 Onboard Power LED