Smeg 129530 - Manual (Page 10)

129530
Turn the appliance off by turning the program selector jog A to
the position “0”.
- Selecting basic drying programs
• For the programs cotton , synthetics and delicate
laundry select the fi nal moisture level (see program
chart). To start drying cycle press START or select additional
settings.
• For the time defi ned program set the preferred drying
time. To start drying cycle press START or select additional
settings
• Mixed laundry program and quick drying program
already have one single moisture level already predetermined.
Select only the additional settings (see program chart). To
start drying cycle press START
• Wool program
is a separate short time defi ned program.
- Selection of additional functions
Button B (MENU) moves you within the menu, button C
(SELECTION) serves to select options (see cf. Selection of
additional functions).
Only MENU functions available for a particular program are
displayed. When the preferred additional function is selected, the
display indicates relevant symbol. After the appliance is switched
off, all additional functions, except the sound signal and child
lock, are reset to their original settings.
Delayed start
Default setting does not include delayed start (display indicates
00:00 hours). Use button C to select between 0 and 20 hours.
For the fi rst two hours the sequence may be set at 30 minute
lapses, after that the sequence is 1 hour. When the preset
time elapses, the selected program starts. In case of power
failure prior the end of the countdown (display fl ashes POWER
FAILURE), press button D (START).
Reduced temperature
This function is selected if you wish to dry laundry at lower
temperature than the program default (see Program Chart). By
selecting this function the drying time is longer.
Certain programs do not allow selection of this function.
After drying is completed, this function returns to the
initial higher temperature.
10