Soundstream Technologies P203 - Manual (Page 8)

2.
3.
4.
5.
6.
7.
8.
9.
11.
12.
13.
14.
15.
16.
17,
18
Kev
to
Connected to fuse or circuit breaker, then battery’s positive post.
Ground Main ground connection. Bolt to a clean chassis ground in the
vehicle.
Remote Remote turn-on input from the head unit. Accepts
Speaker Output Connections Channels 1 2.
Speaker Output Connections Sub Channels.
Speaker Output Connections Channels 3 4.
Inputs Right and left channel inputs for channels
1 2.
Crossover Adjustment Pot Crossover frequency setting for the channels
1 2 high pass Crossover Switch Select “IN” the
amplifier’s internal low pass filter, or to use an external crossover.
Crossover Adjustment Pot Crossover frequency setting for the
subwoofer low pass filter.
LED Indicates amplifier power on.
Crossover Adjustment Pot Crossover frequency setting for the channels
3 4 high pass filter.
Right and channel inputs for channels
1
2 and the subwoofer.
Channels 3 4 Select Switches to allow all channels to be driven
from 2 (CH 1 & 2) or 4 RCA inputs
Right and left channel inputs for channels 3 8 4.
Channels 1 2 Crossover Switch Select “IN” to use the amplifier’s
internal high pass filter. ‘“OUT” to bypass the internal crossover.
Input Level -Variable from
to 1 2.
Input Level Variable from 40mV to Channel.
Input Level -Variable from to 3 4.
Channels 3 & 4 Crossover Switch Select “IN” to use the amplifier’s
internal high pass filter, or “OUT” bypass the internal crossover.