Sangean DT-200VX - Manual (Page 10)

9
Battery Installation
NOTE:
A flashing “E” appearing on the LCD display indicates
a weak battery and that replacement of batteries
is required.
• Turn radio off.
• Prepare replacement batteries to ensure a quick
and easy change. Failure to change batteries within
1 minute will reset presets and clock settings.
• The battery cover is located on the back of the unit.
Apply a gentle downward pressure and slide the
door to the right side of the unit.
• Place 2 ‘AA’ batteries inside the unit oriented to
the illustration located just below the battery
compartment.
Tuning the Radio
Seek Tuning
• Turn radio on using the On/Off button located on
the top of the radio.
• Select desired band by pressing the “Band”
selector on the front of the unit.
• Press and hold the proper tuning button (Up/Down)
for approximately ½ second. Radio will seek for
next active signal station.
• Repeat as many times as desired.