Sirius Satellite Radio XS051 User Manual

Page 8

Mounting to the Windshield

NOTE!

Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v Vehicle

Adapter that is provided with the kit. It is important that you do not modify it in any way since this will result
in damaging your equipment and void the warranty.

1. Insert the 4 suction cups into

the larger side of the holes
on the Visor Vehicle
Mounting Bracket and slide
outward to lock in place.
(figure 1).

2. Loosen the thumb screw and

rotate the Visor Mounting tab
to the appropriate angle for
your vehicle’s windshield.
Tighten the thumb screw.
(figure 2).

3. Slide the XACT Visor

Sirius Satellite Radio
Receiver onto the mounting
tab of the Visor Vehicle
Mount until it locks into place.
(figure 3). To remove the
XACT Visor Sirius Satellite
Radio Receiver, push the
locking tab on the bottom of
the Visor inward and slide
forward.

4. Place the suction cups on the

Visor Vehicle Mount in an
appropriate location on your
windshield. Press firmly to
secure the Visor in place.
(figure 4).

5. Connect the DC Power,

antenna and audio (if
required) to the appropriate
jacks. (figure 5).

INSTALLATION