Sharp CD-SW200 User Manual
Page 32
03/12/19
CD-SW200 26- 33.fm
32
CD-SW200
Tape Recording
Recording on a cassette tape (continued)
Recording from a CD or MP3/WMA disc
You can record the desired disc using the DIRECT PLAY button.
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4
Press the
button.
Recording will be paused.
5
Press one of the 1 - 5 buttons to select the desired disc.
6
Within 5 seconds, press the DIRECT PLAY button to start
recording.
Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after
the tape starts.