Sanyo EM-S8586V - Manual (Page 16)

18. MEMORY FUNCTION
19. INQUIRING FUNCTION
(1) In clock state, press " AM/PM " to display "A" or "P" for 3 seconds.
In cooking state, press " CLOCK/PRESET ", the LED will display the clock for three
seconds and the "A" or "P" for another 3 seconds.
(2) In pre-set state, LED will display the clock and the seconds will be flashing at the same
time. Press " AM/PM" and "A" or "P" will be displayed for 3 seconds. Then press
" CLOCK/ PRESET" to inquire the pre-set time. The pre-set time will flash for
3 seconds, then "A" or "P" will be displayed for another 3 seconds. After that, the oven
will turn back to the clock state.
(4) Press number keys to input the cooking time.For example: to set the time is 12:12, you
can press the number keys "1","2","1","2" in order.
(5) Press " AM/PM " to choose AM or PM. AM or PM will be selected in turn by pressing
the button of " AM/PM " continuously.
unit will go back the clock states.
15
(7) When time arrives, the buzzer will sound twice and the cooking starts.
17. Multi-section cooking
At most 2 sections can be set for cooking. In multi-section cooking, if one section is
weight defrosting, then weight defrosting shall be placed in the first section. When the
first stage finish, the buzzer will sound once and the next stage will begin cooking.
Example: if you want to cook with 80% microwave power for 5 minutes + 60% microwave
power for 10 minutes. The cooking steps are as following:
(2) Press number keys "5","0","0" to set the cooking time.
(4) Press number keys "1","0","0","0" to set the cooking time.
(5) Press "START/+30SEC." to start cooking.
(6) Press "START/ +30 SEC." to confirm the preset procedure. When it is confirmed, the
and the oven will display "1", to "5".
Example:a) Press "POWER" once to choose 100% microwave power;
b) Press number keys "1","0","0","0" in order to adjust the cooking time;
"START/+30SEC." to start cooking and save the program automatically.
just only need to press "MEMORY" key to choose the program wanted and then press
"START/+30SEC." to start cooking.
(1) Press "MEMORY" key several times to set "memory 1" to "memory 5" program,
(2) Set one or two stages program you want.
(3) Press "MEMORY" key to save the memory program setted, or press
(4) Next time when you want to cook with the memory program which has been set, you
(1) Press "POWER" 3 times to choose 80% microwave,now "PL8" is displayed.
(3) Press "POWER" 5 times to choose 60% microwave power, "PL6" is displayed.