Sunbeam Bedding HE3100 - Manual (Page 9)

HI
C
7
Remote control
The easy to use remote control enables the
heater to be operated from anywhere in the
room.
LED screen
The LED screen displays the current settings
including the ambient room temperature, the
selected mode, or timer setting.
ON/OFF switch
Illuminates to indicate that the heater is
switched on.
Mode button
Press the mode button to select your desired
operating mode: STANDBY, LO, HI or AUTO.
Select the AUTO mode when setting the
digital thermostat.
Timer button
The timer button allows you to program the
heater to automatically switch on or off after
a desired time period. It can be set to turn
on between 1 and 12 hours or off between
0.5 and 8 hours.
Infrared receiver
Point the remote control towards the infrared
receiver to operate the heater from anywhere
in the room.
Plus/minus arrows
Use the plus/minus arrow buttons when
in AUTO mode to select your desired heat
setting or after pressing the timer button to
select your desired time setting.
Dimensions
When the wheels are attached your
HE3900 Convection Plus heater is
approximately:
(L)850 x (W)245 x (H)600mm
Figure 3