Sakar 88379 - Manual (Page 6)

- 6 -
• Download your photos as often as possible. Photos may be lost when the batteries
run low.
Starting Your Camera
• Press and hold down the mode button (for about 2 seconds) to start the camera.
• The camera will sound a beep to confirm that it is ready for use.
• The LCD display will indicate the number of photos that can be taken before it
becomes necessary to download them to your PC.
Taking Photos
1. Compose your shot using the viewfinder. (The optimal distance between the camera and
the subject is approximately 5 feet.
2. Hold the camera steady and press the shutter button to take a photo.
3. The camera will beep when a photo is taken.
If the camera fails to beep or if a "0" appears on the LCD this is an indication that the memory is
full in which event no further photos can be taken until the existing photos have been
downloaded and cleared from the camera memory.
Note: The LCD display indicates how many photos may still be taken at the current resolution
and compression. E.g. In "Lr" resolution and "Hd" compression 152 images may be taken.