Spectralizer, Control elements, Info – Sound Performance Lab 9631 User Manual
Page 12

12
Spectralizer
Control Elements
If you want to apply various presets depress A
PPLY
for one
second. The A
PPLY
LED starts to flash indicating that the A
PPLY
mode is activated. You can step through the preset list with U
P
and D
OWN
. Once you have a preset that you want to apply
depress A
PPLY
again. The A
PPLY
LED goes out indicating that the
preset is applied.
In case you want to quit the A
PPLY
mode without applying the
new preset simply press S
TORE
.
To increase operation safety it is impossible to apply presets
by simply depressing U
P
or D
OWN
. The U
P
and D
OWN
status-
LEDs will not flash indicating that the input is not accepted. You
have to depress S
TORE
or A
PPLY
for one second in order to
activate the U
P
and D
OWN
buttons.
Depressing S
TORE
and A
PPLY
simultanouesly for about one
second gets you into a hardware dialogue, called I
NFO
. The LC-
display shows status informations of the digital data stream.
With U
P
/D
OWN
you will jump from one page to the next or
previous. If a selection is provided use A
PPLY
to select.
1.
Software version and date
2.
Selecting inputs:
The S
PECTRALIZER
automatically searches for an input signal. If
both inputs are connected the AES/EBU input will be selected
first. If you want to select the S/P-DIF input you have to call up
the I
NFO
pages.
AES/EBU input detected
or:
no AES/EBU input detected
Press A
PPLY
(if AES/EBU is detected):
AES/EBU input with wordclock detected
Applying a preset:
Depress A
PPLY
for1 sec.,
LED flashes;
use U
P
/D
OWN
to select
preset no.;
depress A
PPLY
again,
LED goes out
Operation safety:
Presets can not be changed
by accident
Info
12