Tape recording – Sharp XL-MP130 User Manual
Page 31
03/12/17
XL-MP130 31-40.fm
31
XL-MP130
Tape Recording
Recording from several CDs continuously:
To perform programmed recording:
To stop recording:
Press the (TAPE ) button.
The CD and tape will stop.
Recording from the radio
To interrupt recording:
Press the
button.
To resume recording, press the
/
( ) button.
To stop recording:
Press the (TAPE ) button.
Note:
If you hear a whistling noise while recording an AM station, move the
AM loop antenna.
Erasing recorded tapes
1
Press the TAPE button.
2
Follow steps 2 - 4 in "Recording from the radio".
1 Perform steps 1 - 5 in "Recording from a CD or MP3/WMA disc"
on page 30.
2 Within 5 seconds, press the / ( ) button to start recording.
1 Program discs and tracks (see page 21).
2 Press the
button.
3 Press the / ( ) button to start recording.
1
Tune in to the desired station (see page 26).
2
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the
button.
Recording will be paused.
4
Press the / ( ) button to start recording.