Stanton T.90 - Manual (Page 12)

SPECIFICATIONS
GENERAL Model: T.90 USB
Dimensions: 452(W) x 370(D) x 143(H)mm
Weight: 8.6Kgs
Power supply: AC 100V, 50/60Hz (For Japan)
AC 110V, 60Hz (For Taiwan)
AC 120V, 60Hz (For U.S.A., Canada, Mexico)
AC 220V, 50Hz (For United Arab Emirates, Chile, Argentina)
AC 220V, 60Hz (For Philippines)
AC 230V, 50Hz (For Europe, New Zealand, South Africa, Singapore, Israel)
AC 240V, 50Hz (For Australia, U.K.)
Power consumption: 11W
STANDARD TEST CONDITION:
Ambient Temperature
20 +/- 2 deg. C
Relative Humidity 65% +/- 5%
NOTE: Measurements can be carried out between 5 deg. C to 35 deg. C and 45% to 85% relative humidity.
TURNTABLE SECTION:
Type
3-speed full manual
Motor 8pole, 3phase,brushless DC motor
Speeds 331/3 and 45rpm and 78rpm
Wow and Flutter Less than 0.15% WRMS (JIS WTD) with 331/3 rpm
S/N Ratio More than 50dB (DIN-B)
Pitch Controls +/- 8%, +/-12%
Starting Torque More than 1.6kgf.cm
Starting Time Less than 1 sec. with 331/3 rpm
Braking Time Less than 1 sec. with 331/3 rpm
Braking System Electronic brake
Time for Speed Change Less than 1 sec. from 331/3 to 45 rpm
Less than 1 sec. from 45 to 331/3 rpm
Less than 1 sec. from 331/3 to 78 rpm
USB Function USB rec. Function
A/D,D/A 16BIT 44.1KHz or 48KHz USB SELECTABLE
Computer interface : USB 1.1compliant, WINDOWS XP or MAC OSX
TONEARM SECTION:
Type
Static balanced S-shaped tonearm with detachable headshell
Effective Arm Length 230.5mm
Overhang 16mm
Applicable Cartridge Weight 5.5 g
Tracking Error Angle Less than 3 degree
Tracking Force Adjustment Range 3-4g
Anti-skating Range 0-7g
Needle Pressure range 2~5g
AUDIO SECTION:
Digital
Digital Output 0.5Vp-p +/-20% (LOAD 75 )
Phono Phono Output 2.5~5.0 mV at 1KHz 5cm/sec (HP-4005)
Frequency Response 20Hz-20KHz +1/-3dB
Channel Separation More than 14dB
Channel Balance Within 2.5dB at 1KHz
Line Line Output 36.8~73.5 mV at 1KHz 5cm/sec (HP-4005)
Frequency Response 20Hz-20KHz/RIAA filter +1/-3dB
ȍ
11