Shark SC637 - Manual (Page 10)

4 TOLL FREE: 1-800-798-7398
IMPORTANT: Make sure you only
add water to the tank. Chemicals or
cleaning solution may damage the
appliance and could be unsafe for
you and your family.
Getting Started
FILLING THE WATER TANK
1 Remove the cap from the inlet hole.
2 Using the fi lling fl ask and funnel,
fi ll the water tank with regular tap
water up until the “Max” line on the
water tank. Use tap water or distilled
water if the tap water in your area is
very hard. Do not let the water in the
water tank go below the refi ll line.
3 Replace the cap on the fi lling inlet.
1
3
2
5 www.sharkcompany.com
English Using Your Garment Steamer
Steam the underside of the
garments made of delicate
fabrics, like silk or velvet.
Practice makes perfect! It
takes time to get used to and
master the garment steaming
techniques.
IMPORTANT: Never steam any article
of clothing while it is being worn.
1 Plug your garment steamer into the
electrical wall outlet.
2 Press the “On/Off” switch to the
“On” position. The power indicator
light will illuminate once the garment
steamer is turned on.
3 Hang the steam nozzle on the door
hook. Wait for the steam to come
out.
4 Holding the steam nozzle with the
steam vents pointing away from you,
start steaming your garments in an
up/down vertical motion. Begin at
the top of the garment and move in
a downward direction pressing the
steam nozzle directly onto the fabric.
5 Keep the steam nozzle in an upright
position so that no condensation will
fl ow back into the garment steamer.
2
1
4