Hardware installation, System requirements, Package contents – SIIG Computer Drive User Manual
Page 2

2
System Requirements
PC:
•
Pentium
®
or equivalent notebook computer with an
available CardBus Type II slot
•
Windows
®
2000 SP4 / XP (32-/64-bit) / Server 2003
& 2008 (32-/64-bit) / Vista (32-/64-bit)
MAC
®
:
•
PowerBook
®
G3 or later with an available CardBus
Type II slot
•
Mac OS
®
X v10.2.8 or later
Package Contents
•
Hi-Speed USB 4-Port CardBus
•
Quick installation guide
Hardware Installation
A switching power adapter is not required to provide
standard power output for each port. However, certain
high performance USB devices require extra power output
from the ports, this power adapter can be purchased
directly through SIIG at www.SIIG.com, part # AC-X00279.
Important: When using the optional power adapter make
sure to plug it into the CardBus before installing into your
notebook computer. See step 2 below for details.
1.
Power off your notebook computer and any other
connected peripheral devices.
- Network Card (6 pages)
- 04-0444A (8 pages)
- Transport GX21 B5350 (70 pages)
- 5.1 (20 pages)
- ID-SC0711-S1 (24 pages)
- RS-232 (12 pages)
- 04-0625A (8 pages)
- FIERY EX2101 (8 pages)
- SATA II-150 (16 pages)
- II-150 (12 pages)
- 04-0288E (12 pages)
- 04-0629A (12 pages)
- 04-0192A (4 pages)
- Network Device EVTEK-5103 (2 pages)
- 04-0417C (12 pages)
- FREEFLOW 701P48438 (20 pages)
- CYBER 2S1P (12 pages)
- PCI 2S (10 pages)
- 133 (12 pages)
- 7.1 (12 pages)
- 04-0631A (20 pages)
- 5090S (12 pages)
- 4110 (8 pages)
- FIERY 700 (8 pages)
- 04-0265F (16 pages)
- 04-0205F (8 pages)
- 5052 (8 pages)
- 700 (12 pages)
- 04-0418A (20 pages)
- 04-0322C (16 pages)
- PCI 4S (10 pages)
- 04-0343C (12 pages)
- UltraATA 133 (26 pages)
- I/O Expander 2S (12 pages)
- 04-0725A (12 pages)
- 04-0207A (8 pages)
- 104-0561C (12 pages)
- 04-0373C (36 pages)
- CYBER 1S1P PCI (12 pages)
- 04-0589A (8 pages)
- 04-0263E (8 pages)
- 4590 (8 pages)
- 04-0341D (12 pages)
- 04-0322B (12 pages)