Sharp SGH-F250 - Manual (Page 68)

SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-4
This Document can not be used without Samsung's authorization
1) Be careful of damaging LCD. 1) Be careful of damaging FPCB and Sub PCB Connector.
1) Be careful of damaging FPCB and Sub PCB Connector. 1) Be careful of damaging FPCB.
11-2. Assembly Instructions
1 2
3 4
1) Attach the double
sided TAPE like
picture.
1) Solder the SPK ,MOTOR and paste the bond.
2) Insert the FPCB in RED line.
1) Attach the GREEN TAPE
like picture.
2) Verify the SILK line.
3) Solder the FPCB on
RED position like
picture.
1) Put in the SUB KEYPAD.
2) Be careful of damaging the SPK and MOTOR.