Smeg LBS 845 - Manual (Page 12)

12 12
Adding laundry
If you want to add laundry to your
machine after program begins press
Start/Pause key for switching machine to
pause mode. If water level in the machine
is appropriate “door” led on program
progress display is on and laundry can
be added to the machine. If “door” led is
not on after one minute than water level
in the machine is not appropriate and
laundry can not be added. You can press
“Start/Pause/Cancel” key for continuing
program.
Cancelling a program
For canceling a program “Start/Pause/
Cancel” key is pressed for three sec-
onds. After this period “Start/Pause/Can-
cel” and all other leds will be off .You can
select a new program and start washing.
If cancel task is performed during wash-
ing “Spin” led on display will light on, ma-
chine will pump and when “Spin” led is off
“door” led will be on, door can be opened
and new program can be selected.
After machine starts operation even if
spin speed or washing temperature is
changed, initial speed and temperature
is valid. In order to change spin speed or
temperature after pressing “Start/Pause/
Cancel” new cycle or temperature can
be selected.
End of the Program
When program ends “ door” led will light
on and door can be opened and machine
is ready for next washing. Press “On/Off”
for turning machine off.
Cotton40 can be used. For selecting
Cotton40 instead of Cotton60 by press-
ing “Start/Pause/Cancel” key machine
is switched to pause position. Program
knob is turned for selecting Cotton40
program.
Even when the program selection knob
is changed during the program initially
selected program will be executed. For
changing washing program continuing
program must be cancelled.
Although selected auxillary functions
must be compatible with washing pro-
gram.
Time delay for program start
Using time delay key you can delay the
starting of the selected program for 3
hours, 6 hours or 9 hours.
When time delay key is pressed once
3hours delay is adjusted and led will
light on. If same key is pressed once
more delay is 6hours, and if it is pressed
once more 9 hours delay is selected. If
time delay key is pressed again delay
is cancelled. After the selection of time
delay when “Start/Pause/Cancel” is
pressed program can be started with
delay. During delay period door can be
opened or laundry can be added
After time delay is initiated by pressing
“Start/Pause/Cancel” you can switch
machine to “Pause” mode and change
delay time.
Emptying Laundry
After program ends machine automati-
cally stops. Turn off tap water. Pull the
handle and open loading door. Turn off
your machine by pressing “On/Off”. After
taking laundry out keep the loading door
open and let the drum ventilate. Check
the bellow and clean.