Standard Horizon QUANTUM Series GX3500S - Manual (Page 34)

GX3500S Page 34
10.17 VOICE SCRAMBLER
If privacy of communications is desired, a CVS2500 voice scrambler (VS) can
be installed in the transceiver. Contact your Dealer to have a CVS2500 installed.
1. Press the [F] key followed by the [7(SCRM)] key, the
voice scrambler is activated. “VS” will appear on the
LCD.
2. Press the [F] key then press and hold the [7(SCRM)]
key for 1 second, the “ SCRM Code ” will appear.
3. Turn the CHANNEL selector knob to change the
scrambler code. The scrambler code can be set from
“
0 ” to “ 3 .”
4. Press the [ENT] key to save the scrambler code and return to radio opera-
tion mode (with voice scrambler).
5. Monitor the channel before transmitting.
6. To disable the voice scrambler, press the [F] key followed by the [7(SCRM)]
key again.