Senco FramePro 752XP - Manual (Page 2)

Comfort Overmold Grip
Resilient grip reduces
vibration and fatigue
Rafter Hanger
Overmold Trigger
FramePro
®
752XP
XtremePro ™ 3½" Framing/Sheathing FRH Nailer
FramePro 752XP provides 15% more ®
power than the FramePro 702XP ®
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions. For additional information on trigger systems and
how SENCO will save you time, reduce costs, and increase quality, call our toll-free
Action Line: 800-543-4596 to find your nearest Authorized Senco Dealer, Distributor
or visit our web site at: www.senco.com
®
©2007 Senco Products, Inc. www.senco.com
Ergonomic Design –
Superb balance for use all day
5-Year Limited
Warranty –
XP Durability
Adjustable Depth-of-Drive –
Drives nails to a consistent and controllable depth
No-Mar Pad –
Protects work surface
Aggressive Toenail Safety –
Teeth grip studs with real bite for precise
positioning
Dry Fire Lockout –
Prevents dry firing,
missed operations and
signals when to reload
In-line Magazine –
Better line of sight for
right and left handers
improves balance and
reduces fatigue
Construction Ruler –
For quick measurements
EZ-Clear Mechanism –
Minimizes time freeing
jammed nails
Rear Two-Step
Loading –
Quick and easy for
right or left handers
360° Adjustable Exhaust
Choose the right trigger system for your specific needs!
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates in
the following a sequence - depress the safety element at the nose of tool against the work
surface then pull the trigger. After each fastener is driven, release the trigger and lift the
tool off the work surface before starting the sequence again. This trigger is recommended
and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire) operates in
the following sequence- pull the trigger first and keep the trigger pulled while moving the
tool along the work surface with a bouncing motion, depressing the safety element at the
nose of the tool against the work surface where the fastener is to be driven. This trigger is
recommended for use by trained professionals only in high production or volume
applications.