Initializing, Initializing the transmitter, Initializing the headset – Sony DR BT160IK User Manual
Page 38
DR-BT160iK_CED [US, ES] 4-108-812-42(1)
US
US
DR-BT160iK_CED [US, ES] 4-108-812-42(1)
US
US
Initializing
Initializing the transmitter
You can reset the transmitter to its default and delete all pairing
information.
1
Connect the transmitter to the iPod.
2
Press and hold the power button for more than about 15 seconds.
During these 15 seconds, the transmitter indicator changes in
sequence as follows:
– flash (at about 1 second intervals) for about 5 seconds
– flash quickly for about 5 seconds
– lights up for about 5 seconds
– flash 4 times
Then, the transmitter is reset to default setting and all pairing
information is deleted.
Note
Do not operate your iPod while initializing the transmitter.
Initializing the headset
You can reset the headset to its default (such as volume setting) and
delete all pairing information.
1
If the headset is turned on, press and hold the POWER button for
about 3 seconds to turn off the headset.
2
Press and hold the POWER button and multi function button
together for about 7 seconds.
The headset indicator (blue) and the headset indicator (red)
flash together four times, and the headset is reset to the default
setting. All pairing information is deleted.