Siemens SF64M330GB/15 - Manual (Page 20)

en
20
Maintenance and care
You can help prevent faults by checking
and maintaining your appliance regularly.
This will save time and reduce problems.
Therefore you should occasionally
examine the inside of your dishwasher.
Overall condition of the
appliance
Check the rinsing compartment for grease
and limescale deposits.
If you find any deposits:
Fill the detergent dispenser with
detergent. Start the empty appliance
with the programme which has the
highest rinsing temperature.
Clean the door seal:
Wipe the door seal regularly with
a damp cloth and remove any deposits.
Dishwasher salt
Check the LOW SALT indicator 4 or
24 . Top up with salt, if required.
Rinse-aid
Check the LOW RINSE-AID indicator 5
on the front panel or the level indicator on
the rinse-aid container
29
. Top up with
rinse-aid, if required.
Filters
The filters
25
prevent large particles of
food in the water from reaching the pump.
These particles may occasionally block
the filters.
When the appliance has finished
washing, check the filters for particles
of food and, if required, clean.
After undoing the coarse micro-filter, the
filter unit can be removed. Remove any
particles of food and rinse the filters
under running water.
Insert the filter unit and tighten the
coarse micro-filter.
Coarse/microfilter